Plot area: 2,872 m2
. Contemporary (avant-garde) three-storey house, with wonderful views to the golf valley
and to the sea. Dweling area: 838 m2
terraces & porches: 314 m2
water sheet pool: 40 m2
ground floor: driveway entrance. Entrance access, covered parking space for 2
cars, garden. Entrance hall, toilet, staircase, kitchen with pantry and laundry, living room,
dining room, porch and terrace. Pool. First floor: living room, four bedrooms with ensuite bathrooms and dressing rooms, 3
of the bedrooms have direct access to a terrace, hallway. Porch and terrace. Basement: separate entrance from outside to boiler room, service bedroom and
bathroom and laundry room. Multipurpose room open to garden. Foundation by insulated footings and reinforced concrete slab walls
according to the demands of the geotechnical study. Perimeter drainage. Mixed bearing structure with pillars and metallic beans of reinforced
concrete. Reinforced concrete ironworks. Exposed metallic structure with large section s-275 jr hot rolled steel
profiles for cantilever of 8 meters in the outdoor terrace area next to the pool. Roofing: flat, inverted with reinforced asphalt double felt-based
waterproofing, danosa brand, esterdan 40 p elastomer of 4 kg/m2 model. Terraces roofs made of lightweight concrete waterproofing with reinforced
asphalt double felt danosa brand, esterdan 40 p model, 4 kg/m2 elastomer. Puncture, separating, filtering layer of 200 gr/m2 geotextile, danofelt py 200. Compliance of the conditions of protection against humidity, acoustic regulations
and energy demand limitation. Rainwater harvesting assured. Facades: made up of exterior leaf of solid perforated brick half foot thick,
and on the inside of grout cladding, thermal insulation by polyurethane rigid
foam, manufactured in situ, made by projection on the inner face of the facade
enclosure, with a nominal density of 45 kg/m3 and 50 MM. Thick, air chamber and
interior leaf of thick partition of triple hollow brick. Compliance of the acoustic
regulations, energy demand limitation and protection against humidity. Walls below ground level of reinforced concrete, waterproofed
on the outer side with reinforced asphalt felt of 4.0kg and with 'drentex' protection,
thermal insulation, carried up in situ of, polyurethane foam of 3cm and
35kg/cm2, with hydro-expansive junctions in structural joints and interior
partition of partition tile. In non-habitable spaces only reinforced concrete wall. Technical parameters for a correct waterproofing, a structural solution and a proper
thermal insulation in order to fulfill the conditions of energy demand limitation. Exterior carpentry aluminium. Technal brand. Climaguard premium
glazing with double laminated glass with air chamber with argon gas and thermal
insulation protection by low emission planitherm 4s colourless glass in main
rooms or with south, east and west orientation. At the discretion of the architects. Compliance of the energy demand limitation, sound insulation and the cte dbsua requirements. Interior divisions of the dwelling with thick partition of hollow brick of 7cm
thick, in wet rooms of 9 CM thick. In basement, the walls will be made of solid
perforated brick of ½ foot thick both sides to be plastered. Technical parameters
appropriated to compliance of the acoustic regulations, safety against fire. Interior carpentry. Interior passage doors made of dm boards veneered on
both sides in oak wood smooth model and interior filling with extruded polystyrene
ursa xps panels to standard une en 1316. Hidden hinges serie kubica from
krona, handle with stainless steel finishing to be chosen by df. Security access
door to dwelling. Wardrobe front doors with folding leaves manufactured in
workshop with dm boards veneered on both sides in oak wood smooth model with
interior filling with extruded polystyrene ursa xps panels according to standard
une en 1316. Interior flooring in polished double load
Legal references
Characteristics
Energy and Risks
